Optical prism lenses optical

Wedge prism can be used to deflect the laser beam at a certain angle alone, or combine the two together as beam deflection application. A single prism can offset the incident beam by a certain angle. If measured by diopter, it is a diopter, which is equivalent to an offset of 1cm at a distance of 1m.

Ø can be used for beam deflection

Ø 0.5 ° - 15 ° beam deflection

Ø products without coating or antireflection coating are available

In addition, irregular prism pairs are also provided

Wedge prism can be used to deflect the laser beam at a certain angle alone, or combine the two together as beam deflection application. A single prism can offset the incident beam by a certain angle. If measured by diopter, it is a diopter, which is equivalent to an offset of 1cm at a distance of 1m

Two can be used as deformable prisms (to correct the elliptical beam output by the laser tube), or to set the beam at 4 θ Deflect at various angles within the range, θ It refers to the light deflected by a single prism. This beam shaping is realized by rotating two beams respectively, which is typically used to scan different positions in imaging.

Altechna wedge prism, which diverts light to the thicker part. By selecting the appropriate wedge, it is easy to create beam deviations without affecting other beam parameters. If two wedges are used close to the inclined surface, a continuous change in beam deviation can be produced by reversing the wedges.